Receiver/Dryer Desiccant Replacement - Honda 2004 Odyssey Service Manual

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

Receiver/Dryer Desiccant Replacement

1. Remove the condensor (see page 21-54).

2. Remove the cap (A) from the bottom of the

condenser, then remove the O-rings (B), the filter

3. Install the desiccant in the reverse order of removal.

Replace the O-rings with new ones, and apply a

thin coat of refrigarent oil (DENSO ND-OIL 8) before

installing them. Be sure to use the correct O-rings

for HFC-134a (R-134a) to avoid leakage.

Table of Contents