Hood Seal and Hood Molding Replacement
1. Using a clip remover, detach the clips (A, B), then
remove the hood seal (C) and hood sub-seal (D). On
Canadian models, detach the clips (E), then remove
the hood molding (F). Take care not to scratch the
hood.
Fastener Locations
A
: Clip, 20
E
: Clip, 18
B
: Clip, 6
D
2. Install the seal and molding in the reverse order of
removal, and note these items:
• Replace any damaged clips.
• Push the clips into place securely.
E
F
C
A
B
20-135