Honda 2004 Odyssey Service Manual page 1330

9. Check for continuity between the appropriate
ABS/TCS control unit connector A (26P) solenoid
circuit terminal and body ground (see table).
TCS DTC
24: NOR
25: NCR
26: NOL
27: NCL
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
NCL (YEL/GRN)
NOR (LT BLU)
NCR
(GRY)
Wire side of female terminals
Is there continuity?
YES Go to step 10.
NO Repair open in the appropriate TCS solenoid
circuit wire between the ABS/TCS control unit and
the modulator unit.
Appropriate Terminal
No. 16
No. 15
No. 3
No. 2
NOL (RED/GRN)
10. Remove the jumper wires from the modulator unit
connector.
11. Connect the modulator unit connector.
12. Remove the TCS relay, and connect the ABS
fail-safe relay connector terminal No. 2 to body
ground with a jumper wire. The wire colors of the
ABS fail-safe relay connector are BLU, RED/BLU,
BRN/BLK, and GRN/YEL.
TCS RELAY CONNECTOR
TCS
SOLENOID
(RED/BLU)
JUMPER
WIRE
Terminal side of female terminals
13. Check the resistance between the appropriate ABS/
TCS control unit connector A (26P) terminal and
body ground (see table).
NOR, NOL, NCR, NCL: 8 10
TCS DTC
24: NOR
25: NCR
26: NOL
27: NCL
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
NCL (YEL/GRN)
NOR (LT BLU)
NCR
(GRY)
Wire side of female terminals
Is the resistance OK ?
YES Go to step 16.
NO Go to step 14.
(at 68°F, 20°C)
Appropriate Terminal
No. 16
No. 15
No. 3
No. 2
NOL (RED/GRN)
(cont'd)
19-129