Honda 2004 Odyssey Service Manual page 1074

16. Install the disc spring in the 1st, 3rd, 4th, and 5th
clutches in the direction shown.
NOTE: The 2nd clutch and 1st-hold clutch do not
have a disc spring.
17. Make sure the inside of the clutch drum is free of
dirt and other foreign particles.
18. Starting with a clutch plate, alternately install the
clutch plates and discs. Install the clutch end plate
(A) with the flat side toward the disc (B).
A
B
19. Install the snap ring (A) with a screwdriver (B).
B
20. Set a dial indicator (A) on the clutch end plate (B).
A
B
21. Zero the indicator with the clutch end plate lifted up
to the snap ring (C).
A
C
(cont'd)
14-461