Honda 2004 Odyssey Service Manual page 837

Shafts and Clutches
Clutch Reassembly (cont'd)
10. Compress the return spring.
11. Install the snap ring (A).
A
12. Remove the special tools.
13. Install the disc spring in the 1st, 3rd, and 4th
clutches in the direction shown.
NOTE: The 2nd clutch does not have a disc spring.
14-224
14. Make sure the inside of the clutch drum is free of
dirt and other foreign matter.
15. Starting with a clutch plate, alternately install the
clutch plates and discs. Install the clutch end plate
(A) with the flat side toward the disc (B).
16. Install the snap ring (A) with a screwdriver (B).
B
A
B
A