Tailgate Handle Replacement - Honda 2004 Odyssey Service Manual

3. Install the latch in the reverse order of removal, and
note these items:
• Apply multipurpose grease to each location
indicated by the arrows.
• Make sure the fuel fill door opens properly and
locks securely.
• Check the operation of the sliding door; verify
that the left sliding door locks when the fuel filler
door release is pulled.
4. Check that the fuel fill door fits flush against the
body. If necessary, adjust it.
Fastener Locations
: Bolt, 2
6 x 1.0 mm
19 N·m
(1.9 kgf·m,
14 lbf·ft)
5. Apply touch-up paint to the hinge mounting bolts
and around the hinges.

Tailgate Handle Replacement

NOTE: Put on gloves to protect your hands.
1. Remove the tailgate trim panel (see page 20-61).
2. Disconnect the handle cable (A) from the tailgate
handle (B).
Fastener Locations
: Nut, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
B
3. Remove the nuts, then remove the tailgate handle.
4. Install the tailgate handle in the reverse order of
removal, and note these items:
• Make sure the handle cable is connected securely.
• Make sure the tailgate opens properly.
A
20-157 20-157