Honda 2004 Odyssey Service Manual page 1502

4. With a flat-tip screwdriver (A), pry the support strut clips (B) away from each of the support struts (C), but do not
remove the clips. With the help of an assistant, release the support struts from the pivot bolts (D).
Fastener Locations
: Bolt, 4
8 x 1.25 mm
29 N·m
(3.0 kgf·m,
22 lbf·ft)
C
5. With the help of an assistant, remove the bolts, then remove the tailgate (E). Take care not to damage the tailgate
and body.
6. Install the tailgate in the reverse order of removal, and note these items:
• Before reattaching the support struts, adjust the tailgate alignment (see page 20-138).
• Make sure the tailgate opens properly and locks securely.
• Make sure the connectors are connected properly, and the wire harness is routed properly.
• When reattaching the support struts (A), set the clips (B) to their original position, then push the support struts
onto the pivot bolts (C).
C
E
D
8 x 1.25 mm
22 N·m (2.2 kgf·m, 16 lbf·ft)
C
C
B
A
B
A
20-137