Automatic Transmission
Mainshaft and Countershaft Speed Sensor Replacement
1. Disconnect the connectors from the mainshaft and
countershaft speed sensors.
2. Remove the bolt securing the mainshaft speed
sensor, then remove the mainshaft speed sensor
from the end cover.
3. Remove the bolt securing the countershaft speed
sensor, then remove the countershaft speed
sensor (A) and the washer (B) from the
transmission housing.
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
4. Replace the O-rings (C) with new ones before
installing the sensors.
5. Install the mainshaft speed sensor, then connect
the connector.
6. Install the countershaft speed sensor with the
washer, then connect the connector.
14-134
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
C
B
A