Pressure Test - Honda 2004 Odyssey Service Manual

Pressure Test

Special Tools Required
• A/T clutch pressure gauge set
07406-0020400 or 07406-0020401
• A/T pressure hose, 2,210 mm 07MAJ-PY4011A
• A/T pressure hose adapter 07MAJ-PY40120
1. Before testing, be sure the transmission fluid is
filled to the proper level.
2. Raise the vehicle, and make sure it is securely
supported.
3. Allow all four wheels to rotate freely.
4. Warm up the engine (the radiator fan comes on),
then stop it and connect a tachometer.
5. Connect the oil pressure gauges to the line
pressure inspection hole (A), 2nd clutch pressure
inspection hole (B), and 1st-hold clutch pressure
inspection hole (C). Do not allow dust or other
foreign particles to enter the holes while
connecting the gauges.
A/T OIL PRESSURE GAUGE SET W/PANEL
07406-0020400 or 07406-0020401
A/T PRESSURE
HOSE, 2,210 mm
07MAJ-PY4011A
(4 Required)
C
A/T PRESSURE
HOSE ADAPTER
07MAJ-PY40120
(4 Required)
B
A
6. Connect the oil pressure gauges to the 1st clutch
pressure inspection hole (D), 3rd clutch pressure
inspection hole (E), 4th clutch pressure inspection
hole (F), and 5th clutch pressure inspection hole (G).
D
F
G
E
(cont'd)
14-355