Hood Insulator Replacement - Honda 2004 Odyssey Service Manual

Hood
Adjustment (cont'd)
4. Tighten each bolt securely.
5. Check that the hood opens properly and locks
securely.
6. Apply touch-up paint to the hinge mounting bolts
and around the hinges.
7. Remove the front bulkhead cover (see page 20-142),
and Apply multipurpose grease to the hood latch
and hood hinge as indicated by the arrows.
Forward
20-134 20-134

Hood Insulator Replacement

'02-04 models
1. Using a clip remover, detach the clips, then release
the hood insulator (A) from the hooks (B). Take care
not to bend the insulator and not to scratch the
hood.
Fastener Locations
: Clip, 10
2. Install the insulator in the reverse order of removal,
and note thses items:
• Replace any damaged clips.
• Push the clips into place securely.
A
B