Honda 2004 Odyssey Service Manual page 1425

Interior Trim
Trim Removal/Installation - Rear Side Lower Area
NOTE:
• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
• Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown.
• To remove the rear side trim panel, remove the speaker grille and rear speaker (see page 22-161).
• When removing the side trim panels, be sure to remove the mounting screws behind the rear speakers.
• Be sure to disconnect the rear accessory socket and brake light failure sensor connectors when removing the
left rear trim panel.
2. Install the trim in the reverse order of removal, and note these items:
• Replace any damaged clips.
• Push the clips into place securely.
• Apply liquid thread lock to the anchor bolts before reinstallation.
• Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.
Fastener Locations
A : Clip (Black)
Left side, 8
Right side, 9
LEFT REAR SIDE TRIM PANEL
Remove the jack cover.
CARGO NET HOOKS
REAR TRIM PANEL
For '01-04 models except Van:
Remove the third row
child seat tether anchor.
CARGO NET
HOOK
SCREW
RIGHT REAR SIDE
TRIM PANEL
20-60
B : Clip (White) C : Clip
Except Van, 8
Except Van, 2
Van, 6
TAILGATE
WEATHERSTRIP
SCREW
B
B
B
B
B
B
BRAKE LIGHT
FAILURE SENSOR
CONNECTOR
B
(Except Van)
C
LOWER
ANCHOR
A
COVER
A
A
THIRD ROW SEAT BELT
LOWER ANCHOR BOLT
7/16-20 UNF
32 N·m (3.3 kgf·m,
24 lbf·ft)
A
A
A A
A
A
C
SCREW
6 x 1.0 mm
REAR ACCESORY
SOCKET CONNECTOR
A
THIRD ROW SEAT
STRIKER COVER
HOOK
THIRD ROW SEAT BELT
Remove third seat belt through the
slit in the side trim panel.
QUARTER GLASS
OPENING TRIM
SLIDING DOOR
A
OPENING TRIM
A
LOWER ANCHOR
COVER
A
A
Portions
SECOND ROW SEAT BELT
LOWER ANCHOR BOLT
7/16-20 UNF
32 N·m (3.3 kgf·m,
24 lbf·ft)
OPENING TRIM
SLIDING DOOR
SILL TRIM