Driveline/Axle
Intermediate Shaft Disassembly
Special Tools Required
• Driver 07749-0010000
• Support base attachment 07LAF-SM40300
• Support base 07965-SD90100
• Attachment, 42 x 47 mm 07746-0010300
1. Remove the heat shield (A) and intermediate shaft
outer seal (B) from the bearing support (C).
A
2. Remove the set ring (D) and the external snap ring
(E).
3. Press the intermediate shaft (A) out of the
intermediate shaft bearing (B) using the special
tools and a press. Be careful not to damage the
metal rings (C) on the intermediate shaft during
disassembly.
07LAF-SM40300
A
16-18
C
E
B
PRESS
B
C
07965-SD90100
4. Remove the internal snap ring.
5. Press the intermediate shaft bearing (A) out of the
bearing support (B) using the special tools and a
D
press.
07746-0010300
A
07LAF-SM40300
PRESS
07749-0010000
B
07965-SD90100