Honda 2004 Odyssey Service Manual page 1329

ABS/TCS Components
DTC Troubleshooting (cont'd)
5. Connect the modulator unit connector.
6. Check for continuity between the appropriate ABS/
TCS control unit connector A (26P) solenoid circuit
terminal and body ground (see table).
TCS DTC
24: NOR
25: NCR
26: NOL
27: NCL
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
NCL (YEL/GRN)
NOR (LT BLU)
NCR
(GRY)
Wire side of female terminals
Is there continuity?
YES Replace the modulator unit.
NO Go to step 7.
7. Disconnect the modulator unit connector.
19-128
Appropriate Terminal
No. 16
No. 15
No. 3
No. 2
NOL (RED/GRN)
8. Connect the appropriate modulator unit connector
TCS solenoid circuit terminals to body ground with
a jumper wires (see table).
TCS DTC
24: NOR
25: NCR
26: NOL
27: NCL
MODULATOR UNIT CONNECTOR
NCL (YEL/GRN)
NOL (RED/GRN)
NOR (LT BLU)
JUMPER WIRE
Terminal side of female terminals
Appropriate Terminal
No. 5
No. 6
No. 8
No. 7
NCR (GRY)
JUMPER WIRE