Atf Cooler Hose Replacement - Honda 2004 Odyssey Service Manual

17. Make sure the transmission is in the P position.
Fill the transmission with ATF, and run the engine
for 30 seconds or until approximately 0.95 (1.0
US qt) is discharged.
18. Remove the drain hose, and reconnect the cooler
return hose to the transmission.
19. Refill the transmission with ATF to the proper level
(see step 5 on page 14-367).

ATF Cooler Hose Replacement

1. Connect the cooler hoses (A) to the lines (B) and the
ATF cooler, and secure them with the clips (C).
A
2 4 mm
(0.1 0.2 in.)
A
C
2. Clamp the ATF cooler hose with the yellow mark
(D) on the clamp (E).
D
E
B
6 8 mm
(0.2 0.3 in.)
C
14-389 14-389