Honda 2004 Odyssey Service Manual page 1406

12. Apply primer (3M N-200, or equivalent) to the areas
between the alignment marks (A) and alignment
dots (B) to the edge of the windshield. Be careful
not to touch the windshield where adhesive will be
applied.
: Apply primer here.
B
50 mm
(2 in.)
A
50 mm
(2 in.)
13. Attach the molding (A) with adhesive tape (B)
(3M 4212, or equivalent) to the edge of the
windshield (C):
• Be sure the alignment mark (D) of the molding
lines up with the alignment mark (E) of the
windshield.
• Be careful not to touch the windshield where
adhesive will be applied.
D
E
A
B
C
C
A
(cont'd)
20-41