Second Row Seat Striker Replacement - Honda 2004 Odyssey Service Manual

Seats
Second Row Seat Striker
Replacement
NOTE: Take care not to bend or scratch the interior trim
and body.
1. Remove these items:
• Second row seat
• Right center pillar lower trim panel (see page 20-
58)
• Rear carpet, as necessary (see page 20-65)
2. Remove the bolts and nut(s), then remove the
striker (A).
Fastener Locations
: Bolt, 3
10 x 1.25 mm
47 N·m
(4.8 kgf·m,
35 lbf·ft)
3. Install the striker in the reverse order of removal.
20-112 20-112
: Nut
Outer striker, 2
Inner striker, 1
10 x 1.25 mm
47 N·m
(4.8 kgf·m,
35 lbf·ft)
For outer striker only
Second Row Seat Cover
Replacement - Bucket-type
NOTE:
• Take care not to tear the seams or damage the seat
covers.
• Put on gloves to protect your hands.
Seat-back Cover
1. Fold the seat-back foward.
2. Remove the second row seat.
3. Remove these items (see page 20-108):
• Center cover
• Recline cover
4. Remove these items (see page 20-102):
• Armrest, both sides
• Grab handle
5. Unzip the bottom of the seat-back cover (A) or
release the hook in the bottom of the seat-back
cover (A). Then raise the seat-back and fold back
the edge of the seat-back cover all the way around.
With seat-back pocket ('99-01 models)
Without seat-back pocket ('99-04 models)
A
A
B
A