Honda 2004 Odyssey Service Manual page 640

D4 Position in 4th gear
• Hydraulic pressure is applied to the servo valve to engage the reverse selector with the countershaft 4th gear while
the shift lever is in the forward range (D4, D3, 2, and 1 position).
• Hydraulic pressure is also applied to the 4th clutch, then the 4th clutch engages the mainshaft 4th gear with the
mainshaft.
• The mainshaft 4th gear drives the countershaft 4th gear, which drives the reverse selector hub and the countershaft.
• Power is transmitted to the final drive gear, which in turn drives the final driven gear.
MAINSHAFT
COUNTERSHAFT
REVERSE
SELECTOR HUB
COUNTERSHAFT
4TH GEAR
MAINSHAFT
4TH GEAR
4TH CLUTCH
FINAL DRIVE GEAR
FINAL DRIVEN GEAR
TORQUE CONVERTER
(cont'd)
14-27