Bumpers; Front Bumpers; Front Crossmember Cover - Jeep 1987 Wrangler Workshop Manual

DETACHABLE COMPONENTS
BUMPERS
GENERAL INFORMATION
Front bumpers on the Wrangler/YJ models are
a one-piece construction. When a vehicle is
equipped with a rear mounted spare, two sepa-
rate bumperettes are used.
All Wrangler/YJ models are equipped with a
front crossmember cover (A) which covers the
area between the grille panel and front bumper
rail (B).
B
841218
| FRONT BUMPERS
Removal
Disconnect and remove the fog lamps, if
equipped.
Remove the nuts and bolts from the bumper
extensions and remove the extensions.
Remove the nuts and bolts attaching the front
bumper rail to the frame.
Installation
Position the front bumper on the frame
extension.
Install the bolts and nuts attaching the front
bumper rail to the frame extension.
Install the bumper extensions.
Install the fog lamps, if equipped.
FRONT CROSSMEMBER COVER
Removal
Remove the nutsand bolts attaching the front
crossmember cover to the frame extensions.
Remove the front crossmember cover from the
frame extensions.
Installation
Position the front crossmember cover on the
frame extensions.
Install the bolt and nuts attaching the front
crossmember cover to the frame extensions.
P-42