Jeep 1987 Wrangler Workshop Manual page 71

DETACHABLE COMPONENTS
SOFT TOP
Installation
Position the support bows and spreader as-
sembly, leaving the spreader assembly in the
collapsed position .
Install the drip rails.
Position the top and connect the straps that
hold the top to the support rails.
Install the front edge of the top in the retainer
on the upper edge of the drip rail.
Snap the top down at the front corners and
along the drip rails above the doors.
Position the rear window and zip the top and
then the side zippers.
Close the tail gate and insert the bottom edge of
the rear curtain into the retaining channel. Fast-
en the side snaps.
Spread the spreader bar.to apply pressure to
the top.
Install the side curtains.
Position the fabric section of the side doors and
fasten the snaps along the bottom edge.
P h
41