Jeep 1987 Wrangler Workshop Manual page 84

DETACHABLE COMPONENTS
SEAT BELTS
Remove the seat belt retractor (F).
INSTALLATION
Inspect the seat belt material for evidence of
wear, cuts or fraying.
Replace as required.
Install the seat belt and seat belt retractor
anchor bolts. Tighten with 34-47 N*m (25-35 ft-
Ibs) torque.
Position the shoulder belt guide on the B-pillar
or roll bar and install the bolt.
Install the shoulder belt guide cover.
Install the seat belt retractor trim cover.
P-54