Converting From The Floorstand Model To The Rack Model - Fujitsu Siemens Computers PRIMERGY TX200 S4 Server Options Manual

12 Converting from the floorstand
model to the rack model
V
CAUTION!
Observe the safety instructions in the
page 15ff.
Figure 65: Removing the stabilizer
Ê Remove the two screws.
Ê Lift the server somewhat and remove the stabilizer.
I
The stabilizer is no longer required.
Ê Open the server as described in the
TX200 S4
chapter "Safety notes" on
chapter "Preparation" on page
Options Guide
21ff.
81