Table of Contents
Advertisement
Hardware Installation
4.3
Setting Up the Floorstand Model
V
CAUTION!
Please note the safety instructions in chapter "Important Notes" on
page 11.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the server (see section "Unpacking the Server" on page 24) and the
HDD cover. The HDD cover is packed in a separate cardboard.
Mounting HDD cover
Figure 2:
Ê Unlock the server (1) and remove the key (figure 2).
Ê Slide up the accessible drives cover (2) as far as possible (2).
Ê Hook the tabs of the HDD cover of into the recesses (3) and push the top
end of the HDD cover (4) in direction of the arrow until it engages.
A26361-K879-Z102-3-7619
Setting Up the Floorstand Model
25
Advertisement
Table of Contents
