Dr User Interface; How To Use The Dr User Interface - Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual

Fujitsu siemens servers dynamic reconfiguration (dr) user's guide
Table of Contents

Advertisement

3
C H A P T E R

DR User Interface

This chapter describes the user interfaces for DR.
3.1

How To Use the DR User Interface

XSCF provides two user interfaces for DR: the command line interface by XSCF
shell, and the browser-based user interface by XSCF Web.
This section describes the main XSCF shell commands used for DR. For other related
commands, see
Section 3.2, "Command Reference" on page 3-25
page
XSCF shell commands for DR operations are classified into two types: DR display
and DR operation commands.
TABLE 3-1
Command name
showdcl
showdomainstatus
showboards
showdevices
showfru
Section 3.2, "Command Reference" on page
3-27.
DR Display Commands
Function
Display the DCL and domain status.
Display domain status.
Display system board information.
Display information about the CPUs, memory, and I/O devices on
system boards.
Display PSB configuration information.
3-25. For XSCF Web, see
and
Section 3.3, "XSCF Web" on
3-1

Advertisement

Table of Contents
loading

Table of Contents