OSPF Commands
ip ospf interface auth-key
Configures an OSPF authentication key for simple authentication on an interface.
ip ospf interface {interface_name} auth-key key_string
Syntax Definitions
interface_name
key_string
Defaults
The default for the authentication key string is a null string.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Sets a password as a simple text string of 8 ASCII characters.
•
Must be used in conjunction with the auth-type command, described on
Examples
-> ip ospf interface vlan-101 auth-key pass
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
ip ospf interface auth-type
show ip ospf interface
MIB Objects
ospfIfTable
ospfIfAuthKey
OmniSwitch CLI Reference Guide
The name of the interface.
An authentication key (8 characters maximum).
Sets the authentication type.
Displays the status and statistics of an OSPF interface.
June 2012
page
22-30, set to simple.
page 22-29