Configure Ospf Ase-Summary Add - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure ospf ase-summary add

configure ospf ase-summary add <ip address> <mask> cost <cost>
{tag <number>}
Description
Aggregates AS-external routes in a specified address range.
Syntax Description
ipaddress
mask
cost
tag
Default
N/A.
Usage Guidelines
This command is only valid on an ASBR.
Example
The following command summarizes AS-external routes:
configure ospf ase-summary add 175.1.0.0/16 cost 10
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1744
Specifies an IP address.
Specifies a subnet mask.
Specifies a metric that will be given to the summarized route.
Specifies an OSPF external route tag.
ExtremeWare 7.5 Command Reference Guide