Show Ipxroute - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands—"i" Series Platforms Only

show ipxroute

show ipxroute {vlan <vlan name> | xnetid <netid> | origin [static | rip |
local]}
Description
Displays the IPX routes in the route table.
Syntax Description
vlan name Specifies a VLAN name.
netid Specifies an IPX network number.
static Specifies a statically defined route.
rip Specifies a RIP learned route.
local Specifies a local interface.
Default
N/A
Usage Guidelines
Route information is entered into the IPX route table in one of the following two ways:
• Dynamically, by way of RIP
• Statically, using the
configure ipxroute add
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN. To remove the advertisement
of an IPX VLAN, use the
Example
The following command displays the IPX routes in the route table for the VLAN named accounting:
show ipxroute vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
2058
configure ipxroute delete
command
command.
ExtremeWare 7.5 Command Reference Guide