Configure Bgp Peer-Group Source-Interface - Extreme Networks ExtremeWare Command Reference Manual

configure bgp peer-group source-interface

configure bgp peer-group <peer group> source-interface [any | vlan <vlan
name>]
Description
Configures the source interface for a peer group and all the neighbors of the peer group.
Syntax Description
peer group
any
name
Default
N/A.
Usage Guidelines
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
• remote-as
• timer
• source-interface
• soft-in-reset
• password
Example
The following command configures the source interface for the peer group outer and its neighbors on
the VLAN accounting:
configure bgp peer-group outer source-interface accounting
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on "i" series of switches.
ExtremeWare 7.5 Command Reference Guide
Specifies a peer group.
Specifies any source interface.
Specifies a VLAN name.
configure bgp peer-group source-interface
1893