Configure Ipxrip Vlan Delay - Extreme Networks ExtremeWare Command Reference Manual

configure ipxrip vlan delay

configure ipxrip vlan [<vlan name> | all] delay <msec>
Description
Configures the time between each IPX/RIP packet within an update interval.
Syntax Description
vlan name Specifies a VLAN name.
all Specifies all VLANs.
msec Specifies the delay time in milliseconds.
Default
The default setting is 55 milliseconds.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command configures a delay of 80 milliseconds:
configure ipxrip vlan accounting delay 80
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
configure ipxrip vlan delay
2027