Show Stacking Port - Extreme Networks ExtremeWare Command Reference Manual

Stacking Commands

show stacking port

show stacking port <stacking-port-no> [stats | rxerror | txerror |
utilization | packets]
Description
Displays statistics about the stacking port on the current switch.
Syntax Description
stacking-port-no Specifies the stacking port number of the current switch. For a list of stacking port numbers
by switch model, see Table 27 on page 1396.
stats Specifies to display port statistics for the stacking port.
rxerror Specifies to display real-time receive error statistics.
txerrors Specifies to display real-time transmission error statistics.
utilization Specifies to display port utilization.
packets Specifies to display a histogram of packet statistics.
Default
N/A
Usage Guidelines
If only a stacking port is specified, the switch displays all the information available for the port.
Example
The following example displays port utilization statistics for a Summit 400-48t:
show stacking port 53 utilization
The output of the command is similar to:
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is only available on the Summit 200, Summit 300-24, and Summit 400 switches.
1400 ExtremeWare 7.5 Command Reference Guide