Configure Wireless Ports Bind - Extreme Networks ExtremeWare Command Reference Manual

Remote Connect Commands

configure wireless ports bind

configure wireless port <vport> bind [ap-mac <ap-mac> | ap-serial
<ap-serial> | ap-ipaddr <ap-ipaddr>]
Description
Assigns the specified A300 to the specified virtual port on this Summit 300-48 Attachment switch.
Syntax Description
vport Specifies a virtual port on the switch in the format virtual:n, where n is the virtual port number.
ap-mac Specifies the MAC address of the A300.
ap-serial Specifies the serial number of the A300.
ap-ipaddr Specifies the IP address of the A300.
Default
N/A
Usage Guidelines
This command should follow execution of
].
ap-ipaddr
Example
The following command assigns the A300 with IP address
switch.
config wireless ports virtual:1 bind ap-ipaddr 10.211.32.96
History
This command was first available in an ExtremeWare7.4.
Platform Availability
This command is available on the Summit 300-48 switch.
2088
configure wireless bind [ap-mac | ap-serial |
10.211.32.96
to virtual port on the
1
ExtremeWare 7.5 Command Reference Guide