Configure Vlan Add Ports Restart - Extreme Networks ExtremeWare Command Reference Manual

configure vlan add ports restart

configure vlan <vlan name> add ports [<portlist> | all] restart
Description
Configures ESRP to restart ports if there is a state change and the downstream switch is from another
vendor.
Syntax Description
vlan name
portlist
all
Default
N/A.
Usage Guidelines
If a VLAN becomes a slave, ESRP disconnects member ports that have port restart enabled. The
disconnection of these ports causes downstream devices to remove the ports from their FDB tables.
After 3 seconds the ports re-establish connection with the ESRP-enabled device. This feature allows you
to use ESRP in networks that include equipment from other vendors.
Example
The following command enables port restart for ports 7-9 on VLAN esrp1:
configure vlan esrp1 add ports 7-9 restart
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies an ESRP-enabled VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies all ports.
configure vlan add ports restart
1509