Show Ports Ingress Stats - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

High-Density Gigabit Ethernet Commands—Alpine 3800 and BlackDiamond 6800 Series Only

show ports ingress stats

show ports {<portlist>} ingress stats {detail}

Displays real-time ingress statistics for one or more

Syntax Description

Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.

Specifies more detailed information per ingress queue.

Usage Guidelines

series I/O modules support eight ingress QoS profiles (IQP1 - IQP8).

High-priority packets are packets received below the configured ingress committed rate, and

low-priority packets are packets received above the committed-rate.

View these statistics to analyze usage trends and to maximize network efficiency.

If you do not specify the

• Port Number

• Link Status—The current status of the link. Options are:

— Ready (R): The port is ready to accept a link.

— Active (A): The link is present at this port.

— Disabled (D): The link is disabled at this port.

— Not Present (NP): The link is not present at this port.

• High Priority Bytes—Sum, per port, of the bytes forwarded for received high-priority packets (traffic

received below the committed rate configured for the ingress QoS profile).

• Low Priority Bytes—Sum, per port, of the bytes forwarded for received low-priority packets (traffic

received above the committed rate configured for the ingress QoS profile).

• Received Total Bytes—The total number of bytes that were received by the port.

• Receive Bytes Dropped—Total number of bytes dropped for this port.

• Total Percent Dropped—Percentage of incoming bytes dropped due to oversubscription congestion

or ingress rate limiting. Displayed with a precision of 1/100 of a percent.

• Transmit XOFF—Total number of XOFF flow control packets sent from this port.

If you specify the

• Queue—One of eight ingress queue names for this port.

keyword, the output indicates the following:

keyword, the following additional information is displayed per ingress queue:

series ports.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5