Atm Commands-Blackdiamond 6800 Series Platforms Only; Configure Atm Add Pvc - Extreme Networks ExtremeWare Command Reference Manual

ATM Commands—BlackDiamond 6800 Series Platforms Only

configure atm add pvc

configure atm add pvc <vpi/vci> encap [l2 | ip peer-ipaddress <ipaddress>]
vlan <vlan name> ports <portlist>
Description
This command configures PVC on an ATM port.
Syntax Description
vpi Specifies the VPI parameter as an integer.
The valid VPI range is from 0 to 15.
vci Specifies the VCI parameter as an integer.
The valid VCI range is from 17 to 4095
encap Specifies the type of encapsulation to be used.
l2 Specifies Layer-2 encapsulation.
ip peer-ipaddress Specifies that the VLAN will carry only routed IP traffic and that LLC encapsulation should
be used.
vlan name Specifies a VLAN name.
portlist Specifies list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
Default
None
Usage Guidelines
Before packets can be forwarded over ATM ports, at least one PVC must be configured on the port and
mapped to a VLAN. Each PVC must be mapped to one or more VLANs and each mapping must be
designated to use the bridged protocol encapsulation or the routed protocol encapsulation. Both
encapsulations can be simultaneously used on a PVC as long as they are associated with different
VLANs.
The PVC is identified by the specified
range of 0 through 15. The
parameters are defined in RFC 2648/1483.
The parameter indicates the type of encapsulation that is to be used on the PVC for traffic from
encap
the associated VLAN. The
Encapsulation for Bridged Protocols (defined in RFC 2684). The
will carry only routed IP traffic and that the LLC Encapsulation for Routed Protocols (defined in RFC
2684) should be used.
Example
The following command configures PVC 5/101 on ATM port 1:1 on a VLAN named
configure atm add pvc 5/102 encap l2 vlan accounting port 1:1
2096
and
vpi vci
parameter is an integer in the range of 17 through 4095. Both
vci
keyword is an abbreviation for Layer-2 and indicates the LLC
l2
parameters. The parameter is an integer in the
vpi
keyword indicates that the VLAN
ip
.
accounting
ExtremeWare 7.5 Command Reference Guide