Configure Isis Vlan Authentication - Extreme Networks ExtremeWare Command Reference Manual

configure isis vlan authentication

configure isis vlan <vlan name> [level-1 | level-2 | level-1-2]
authentication [simple-password <isis simple password> {no-check} |
hmac-md5 <hmac-md5> {no-check} | none]
Description
Configures authentication on a VLAN for the IS-IS levels on a routing interface:
Syntax Description
vlan name
level-1
level-2
level-1-2
isis simple password
no-check
md5 key
Default
An interface does not have any authentication configured on it by default.
Usage Guidelines
Two types of authentication are supported: simple password and HMAC-MD5. Simple password
authentication inserts a text password in the transmitted packet. HMAC-MD5 authentication inserts an
authentication key that is generated using the cryptographic hash function, HMAC, on the data present
in the packet. The
authenticated.
The
level-1
configured.
Example
The following command configures authentication for level 1 and level 2 to use the simple password
"extreme" for vlan v1, and to drop non-authenticated packets:
configure isis vlan v1 level-1-2 authentication simple-password extreme
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies the name of a VLAN.
Specifies IS-IS level 1.
Specifies IS-IS level 2.
Specifies IS-IS level 1 and level 2.
Specifies simple password authentication.
Specifies not to drop packets that cannot be authenticated.
Specifies HMAC-MD5 authentication.
option prevents the system from dropping received packets that cannot be
no-check
, , and
level-2 level-1-2
options specify the levels on which the authentication is to be
configure isis vlan authentication
1725