Configure Atm Scrambling - Extreme Networks ExtremeWare Command Reference Manual

ATM Commands—BlackDiamond 6800 Series Platforms Only

configure atm scrambling

configure atm scrambling [on | off] ports <portlist>
Description
This command configures an ATM port to scramble the cell payload on a specified ATM port(s).
Syntax Description
on
off
portlist
Default
Enabled
Usage Guidelines
Scrambling is used to improve signal synchronization and the performance of the ATM cell delineation
process.
Choose either or . Scrambling is enabled by default.
on off
Example
The following command example turns off the scrambling function for port 1 of the ATM module
installed in slot 8 of a BlackDiamond switch.
configure atm scrambling off ports 8:1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available only on the BlackDiamond switch.
2100
Enables payload data scrambling. Default is on.
Disables payload data scrambling.
Specifies list of ports or slots and ports. May be in the form 2:5, 2:6-2:8.
ExtremeWare 7.5 Command Reference Guide