Create Eaps Shared-Port - Extreme Networks ExtremeWare Command Reference Manual

create eaps shared-port

create eaps shared-port
create eaps shared-port <port>
Description
Creates an EAPS shared port on the switch.
Syntax Description
port Specifies the port number of the common link port.
Default
N/A.
Usage Guidelines
To configure a common link, you must create a shared port on each switch of the common link.
Example
The following command creates a shared port on the EAPS domain.
create eaps shared-port 1:2
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on the "i" series of switches.
ExtremeWare 7.5 Command Reference Guide 1419