Configure Inline-Power Backup-Source - Extreme Networks ExtremeWare Command Reference Manual

configure inline-power backup-source

configure inline-power backup-source [internal | none] slot <slot_number>
Description
Configures the backup power supply for the external 48V power source.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module.
Syntax Description
internal
none
slot_number
Default
None
Usage Guidelines
This commands lets you specify whether or not there is a backup power supply to the external 48V
power source. If
power. If
none
case, the ports will not be able to provide power.
Example
The following command sets the internal power supply as the backup power supply to the external 48V
power supply for slot 1:
config inline-power backup-source internal slot 1
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules.
ExtremeWare 7.5 Command Reference Guide
Specifies that the internal power supply will serve as the backup power supply if the external 48V
power source loses power.
Specifies that there is no backup power supply if the external 48V power source loses power. In
this case, the ports will not be able to provide power.
Specifies the slot for which the backup power supply is being configured.
is selected, the internal power supply is brought up if the external 48V loses
internal
is selected, no other power supply is brought up if the external 48V loses power. In that
configure inline-power backup-source
2279