Show Wireless Ports Interface Status - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine

show wireless ports interface status

switches.
show wireless ports [<portlist> | all] interface [1 |2] status
Description
Displays the current state of the selected port and interface.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
Default
N/A.
Usage Guidelines
Use this command to examine RF profiles on a per wireless port basis. This command allows you to
view the log of a specific port or ports, filtering out the switch log.
Examples
The following example displays the status for wireless ports 3 on interface 1:
show wireless ports 3 interface 1 status
The output of the command is similar to:
Intf St. Tx Rate Power
-------------------------------------------------------------------------------
3:1 EN 54 FULL
History
Platform Availability
1382
Ch ESS
52 fz-wpa-psk-aes
Max Cl. Last State Change
100 Mon Jul 26 17:15:11 2004
ExtremeWare 7.5 Command Reference Guide