Unconfigure Ospf - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

unconfigure ospf

unconfigure ospf {vlan <vlan name> | area <area identifier>}
Description
Resets one or all OSPF interfaces to the default settings.
Syntax Description
vlan name
area identifier
Default
N/A.
Usage Guidelines
None.
Example
The following command resets the OSPF interface to the default settings on the VLAN accounting:
unconfigure ospf accounting
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1842
Specifies a VLAN name.
Specifies an OSPF area.
ExtremeWare 7.5 Command Reference Guide