Configure Iparp Timeout - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IP Unicast Commands

configure iparp timeout

configure iparp timeout <minutes>

Configures the IP ARP timeout period.

Syntax Description

Specifies a time in minutes.

Usage Guidelines

A setting of 0 disables ARP aging.

The following command sets the IP ARP timeout period to 10 minutes:

configure iparp timeout 10

This command was first available in ExtremeWare 4.0.

This command was added to the "e" series of switches in ExtremeWare 7.1e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5