IPX Commands—"i" Series Platforms Only
show ipxservice
show ipxservice {vlan <vlan name> | xnetid <netid> _ origin [static | sap |
local]}
Description
Displays IPX services learned by way of SAP.
Syntax Description
vlan name
Specifies a VLAN name.
netid
Specifies an IPX network number.
Default
N/A
Usage Guidelines
The service information is entered into the IPX Service Table in one of the following two ways:
• Dynamically, by way of SAP
• Statically, using the
configure ipxservice add
Example
The following command displays IPX/SAP service information for the VLAN named accounting:
show ipxservice vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
2060
command
ExtremeWare 7.5 Command Reference Guide