Create Eaps - Extreme Networks ExtremeWare Command Reference Manual

EAPS Commands

create eaps

create eaps <name>
Description
Creates an EAPS domain with the specified name.
Syntax Description
name
Default
N/A.
Usage Guidelines
The parameter is a character string of up to 32 characters that identifies the EAPS domain to be
name
created. EAPS domain names and VLAN names must be unique: Do not use the same name string to
identify both an EAPS domain and a VLAN.
On "e" Series of Switches. Only four EAPS domains per switch are supported and these domains
must share a common ring port.
Example
The following command creates EAPS domain eaps_1:
create eaps eaps-1
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1418
Specifies the name of an EAPS domain to be created. May be up to 32
characters in length.
ExtremeWare 7.5 Command Reference Guide