Configure Inline-Power Priority - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

configure inline-power priority

configure inline-power priority [low | high | critical] ports <portlist>
Description
Configures the port priority.
NOTE
This command is available only for the Summit 300-48 switch.
Syntax Description
low Specifies that the port is to have low priority, which is the default value. Ports with this priority level
are given power only after all critical and high priority ports have power.
high Specifies that the port is to have high priority. Ports with this priority level are given power only after
all critical ports have power.
critical Specifies that the port is to have critical priority. Ports with this priority receive power first.
portlist Specifies one or more slots and ports. May be in the form 1:1, 1:2, 1:3-1:5.
Default
Low priority
Usage Guidelines
Power is allocated to ports by their designated priority. Power allocation is first provided to the higher
priority ports.
Example
The following example sets port 5 as a critical power port:
configure inline-power priority critical ports 5
History
This command was first available in ExtremeWare 7.3e.
Platform Availability
This command is available only on the Summit 300-48 switch.
2288 ExtremeWare 7.5 Command Reference Guide