Show Atm Pvc - Extreme Networks ExtremeWare Command Reference Manual

ATM Commands—BlackDiamond 6800 Series Platforms Only

show atm pvc

show atm [<vpi / vci> | all] {vlan <vlan name>} ports <portlist>
Description
This command display status information for a PVC.
Syntax Description
vpi
vci
vlan name
portlist
Default
None
Usage Guidelines
You can specify a particular PVC to display information for, or you can specify that information for all
PVCs be displayed.
Use the optional parameter to narrow the range of status information the command displays;
vlan
otherwise, the command displays status information for all VLANs.
You can use the optional
displays; otherwise, the command displays the status information for all PVCs associated with all ATM
ports.
By default, the command displays a summary of status information for the specified PVC.
The summary of status information includes the following information for each PVC:
• Port number
• VPI/VCI
• VLAN IDs on this PVC
• Type of PVC (L2 or IP)
• Peer IP address (for IP PVCs)
• Received octets
• Received packets
• Transmitted octets
• Transmitted packets
2104
Specifies the VPI parameter as an integer.
The valid VPI range is from 0 to 15.
Specifies the VCI parameter as an integer.
The valid VCI range is from 17 to 4095
Specifies a VLAN name.
Specifies list of ports or slots and ports. May be in the form 1, 2, 3-5,
2:5, 2:6-2:8.
parameter to narrow the range of status information the command
portlist
ExtremeWare 7.5 Command Reference Guide