Show Inline-Power Configuration Slot - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

show inline-power configuration slot

show inline-power configuration slot <slotlist>
Description
Displays inline power configuration information for the specified slots.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
slotlist Specifies one or more slots.
Default
N/A
Usage Guidelines
The output displays the following inline power configuration information for the specified slots:
• Status—Indicates power status:
— Enabled: The slot is available to provide power.
— Disabled: The slot is not available to provide power.
• Cfg PSU Backup—Indicates the current setting of power source precedence:
— Internal
— None
• PSU Active—Indicates the power source currently supplying power:
— Internal
— External
• Usage Threshold—Displays the configured alarm threshold as a percentage.
• Connection Order—Displays the list of ports (1 – 32) by current connection order. (Maximum for the
Alpine module is 32 ports.)
Example
The following command displays inline power configuration information for slot 1:
show inline-power configuration slot 1
Following is sample output from this command:
Slot Status Cfg PSU Backup
1 Enabled Internal
2316
PSU Active Usage Threshold
Internal 70%
ExtremeWare 7.5 Command Reference Guide