Unconfigure Inline-Power Violation-Precedence Ports - Extreme Networks ExtremeWare Command Reference Manual

unconfigure inline-power violation-precedence ports

unconfigure inline-power violation-precedence ports
unconfigure inline-power violation-precedence ports <portlist>
Description
Resets violation precedence to the default value for the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
Default
The default violation precedence value is max-class-operator.
Usage Guidelines
This command resets the violation precedence that was configured with the following command:
configure inline-power violation-precedence [advertised-class | operator-limit |
max-class-operator | none] ports <portlist>
Example
The following command resets the violation precedence to its default value for port 3 on slot 1:
unconfig inline-power violation-precedence ports 1:3
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
ExtremeWare 7.5 Command Reference Guide 2335