Configure Bgp Peer-Group Remote-As-Number - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands—"i" Series Switches Only

configure bgp peer-group remote-AS-number

configure bgp peer-group <peer group> remote-AS-number <number>
Description
Configures the remote AS number for a peer group and all the neighbors of the peer group.
Syntax Description
peer group
number
Default
N/A.
Usage Guidelines
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
• remote-as
• timer
• source-interface
• soft-in-reset
• password
Example
The following command configures the remote AS number for the peer group outer and its neighbors:
configure bgp peer-group outer remote-AS-number 65001
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on "i" series of switches.
1890
Specifies a peer group.
Specifies a remote AS number.
ExtremeWare 7.5 Command Reference Guide