Show Mcast-Queue-Mgmt - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

show mcast-queue-mgmt

show mcast-queue-mgmt
Description
Displays the current queue configuration for multicast data forwarding.
Syntax Description
This command has no options or parameters.
Default
N/A
Usage Guidelines
Use this command to display the current configuration being used for multicast data load balancing.
This feature is configured using the
Example
The following command displays the current configuration for the multicast queue management:
show mcast-queue-mgmt
Output from this command is similar to:
show mcast-queue-mgmt
Muticast Queue management
Start Queue
End Queue
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on the "i" platforms only.
2012
configure mcast-queue-mgmt
: Enabled
: 0
: 7
command.
ExtremeWare 7.5 Command Reference Guide