Unconfigure Mcast-Queue-Mgmt - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

unconfigure mcast-queue-mgmt

unconfigure mcast-queue-mgmt
Description
This command resets the configured queues for the multicast data forwarding.
Syntax Description
This command has no options or parameters.
Default
N/A
Usage Guidelines
Use this command to return to using a single queue for multicast stream forwarding. It does not disable
the multicast queue management feature that was configured using the
configure mcast-queue-mgmt
command.
Example
The following example removes multiple queue configuration for multicast stream forwarding:
unconfigure mcast-queue-mgmt
History
This command was available in ExtremeWare 7.4.
Platform Availability
This command is available on the "i" platforms only.
2020 ExtremeWare 7.5 Command Reference Guide