Enable Bootp Vlan - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

enable bootp vlan

enable bootp vlan [<vlan name> | all]
Description
Enables the generation and processing of BOOTP packets on a VLAN to obtain an IP address for the
VLAN from a BOOTP server.
Syntax Description
vlan name Specifies a VLAN name.
all Specifies all VLANs.
Default
Enabled for all VLANs
Usage Guidelines
None
Example
The following command enables the generation and processing of BOOTP packets on a VLAN named
accounting:
enable bootp vlan accounting
History
This command was available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1656 ExtremeWare 7.5 Command Reference Guide